October 10, 2017
Pool toys are great, but what's left over inside the toy after you come home from the pool is not! In general a lot of water toys come with holes in them so water cannot get trapped inside and can drain. Unfortunately, it is typical that not all of the water makes its way out which leaves the opportunity for mold. But no worries- there is no need to fret. You will be surprised to learn what a glue gun is used for. In this case, we cam easily fix this issue and continue enjoying the sunny days at the pool.
What You Will Need:
-Surebonder hot glue gun and hot glue
- Pool toys
There isn't a trick for this solution and any adult can do this quick fix. All you need to do is apply a small dab of adhesive and allow the glue to cool.
There you have it! A quick and easy way to stop mold in your pool toys before it happens.
For more Inspirations by Surebonder be sure to follow us on social and check back on our blog at a later date.
Comments will be approved before showing up.
July 12, 2018
July 11, 2018
July 10, 2018 1 Comment